Techo debuts new CNC material handling system

Techno CNC Systems is introducing the Venture ME4 CNC material handling work cell, designed with the high-production cabinet shop in mind for streamlining material handling, CNC routing, and offloading operations….

Techno CNC Systems is introducing the Venture ME4 CNC material handling work cell, designed with the high-production cabinet shop in mind for streamlining material handling, CNC routing, and offloading operations.

The system is G-Code-based and compatible with all the popular cabinet design nesting programs, according to the company.

The ME4 work cell will automatically load a 4x8 sheet from a pallet by way of a scissor lift. The material sheet is safely and accurately guided onto the CNC platform by the movable gantry equipped with suction cups using retractable guide rails and stops on the table. Once the sheet is placed, the operator turns on the vacuum hold down and starts the cut cycle for the CNC to execute.

After the sheet is fully processed, it is then pushed off to a conveyor table at the front end while another sheet is simultaneously loaded from the rear of the machine. The residual dust that is not picked up from the dust collector is swept off the table and conveyor into various chutes keeping the work cell clear of dust and debris. Upon completion, the individual parts are labeled by the operator through an integrated barcode system.

For information, visit www.technocnc.com.