Skip to main content

New router base from Woodpeckers

Woodpeckers

Northeast Ohio tool manufacturer, Woodpeckers, recently announced its new Multi-Function Router Base. This tool adapts to most routers and adds micrometer adjustment, then guides the bit parallel to the stock edge or in a flawless arc, according to the company.

“A generously proportioned fence mounts to the base or an extension head, giving you a range of 0" to 21" from fence to the center of your bit,” the company explained in a statement. “Similarly, the base has four locations for the trammel axis point, allowing you to cut circles as small as 3/4" and up to 8-1/4". Move the trammel pin to the extension head and you can cut circles as large as 45". Optional extenders can be added to take circle capacity to nearly 5' and parallel guiding to 30".

“Adding another dimension to the system, a pair of centering pins can be added to the base to precisely center your bit on stock up to 4-7/8" wide. This is particularly useful for mortising. The geometry of the base and the micro-adjuster combine to make it possible to cut mortises larger than your router bit with a high degree of accuracy.”

The Multi-Function Router Base sells for $239.99.

For more, visit www.woodpeck.com.

Related Articles

Multi-Router

Woodpeckers acquires the Multi-Router

Northeast Ohio tool manufacturer, Woodpeckers LLC, has purchased all business assets of Multi-Router from Lorraine Machine of Greenville, S.C.

Woodpeckers

New MortiseMatch from Woodpeckers

Woodpeckers recently released the MortiseMatch, which converts the Domino joiner from a hand-held tool to a stationary bench-top horizontal mortising machine.

Bora

New fixed base router from Bora Tool

Bora Tool introduces a new Fixed Base Router with a 3.25-hp soft-start motor, electronic speed control, cast-aluminum base and more, according to the company.

Woodpeckers

Woodpecker adds Cordless Drill Station

Northeast Ohio tool manufacturer, Woodpeckers, recently introduced its new Cordless Drill Station.

Woodpeckers ThinRip-Guide

New ThinRip Guide from Woodpeckers

Woodpeckers introduces the ThinRip Guide, a table saw accessory that delivers consistent thin strips without binding, burning or kickback, according to the company.

Woodpecker

New angle drilling table from Woodpeckers

Woodpeckers introduces the Duax Angle Drilling Table, an auxiliary table for drill presses.

Exact-90_04

New Exact-90 miter gauge from Woodpeckers

Woodpeckers introduces the Exact-90 Miter Gauge for a perfectly square cut, regardless of a sloppy miter slot, according to the manufacturer.

Woodpeckers

New fence setting gauges from Woodpeckers

Woodpeckers introduces the Simple Set Fence Gauges for aligning the rip fence, repeating setups, and checking table-to-blade alignment.

Woodpeckers

Woodpeckers introduces the Precision Taper Jig

Woodpeckers recently announced its new Precision Taper Jig, which offers instantly repeatable quarter-degree angle setting, material clamping, zero-clearance material support and length capacity that can extend up to 48", according to the northeast Ohio tool manufacturer.