Skip to main content

New In-Dexable additions from Woodpeckers

Woodpeckers In-Dexable

Woodpeckers recently released a new Protractor Head and a new Centering Head to complement its In-Dexable range of adjustable squares.

“When your projects call for angles other than 45 and 90 degrees, the new In-Dexable Protractor Head will be a welcome addition to your shop. The smooth-turning protractor can be adjusted to any angle between 0 and 90 degrees both right and left. Built-in stops register standard angles (22.5, 45, 67.5 and 90 degrees) quickly and accurately. All other angles are easily set to the high-contrast laser-engraved scale. Two large locking knobs and an 8" long reference edge build confidence in your angle layout. When you’re working straight and square, the Protractor is still a welcome partner in your shop. When locked square, it’s a handy T-square with built-in scribing guides. The Protractor comes standard with an 18" blade.

“The Centering Head holds the blade at a 45-degree angle relative to machined 90-degree surfaces. Marking the two diagonals of a square locates center. Similarly, strike the diameter of a circle with the square resting on the outside in two different spots and you’ve located the center of the circle. Maintaining the scribing feature found in all In-Dexables, Woodpeckers made the back of the centering head flat and the blade indexes to that side. It’s a nice compact size for scribing parallel to the edge of your stock. The Centering Head comes standard with the 6" blade.

For more, visit

Related Articles


New router base from Woodpeckers

Northeast Ohio tool manufacturer, Woodpeckers, recently announced its new Multi-Function Router Base.

New ruler accessory from Woodpeckers

Woodpeckers, a tool manufacturer in northeast Ohio, recently introduced the 45/90 Combo-T accessory for woodworking rulers.


New Exact-90 miter gauge from Woodpeckers

Woodpeckers introduces the Exact-90 Miter Gauge for a perfectly square cut, regardless of a sloppy miter slot, according to the manufacturer.


New MortiseMatch from Woodpeckers

Woodpeckers recently released the MortiseMatch, which converts the Domino joiner from a hand-held tool to a stationary bench-top horizontal mortising machine.


New angle drilling table from Woodpeckers

Woodpeckers introduces the Duax Angle Drilling Table, an auxiliary table for drill presses.


New Stair Gauge Set from Woodpeckers

Northeast Ohio tool manufacturer, Woodpeckers, recently introduced a four-piece Stair Gauge Set.

Woodpeckers SteadyCurve

New band saw template guide from WoodPeckers

Woodpeckers presents the new SteadyCurve Band Saw Template Guide, a tool that follows a template for cutting just outside the lines on contoured projects.

Woodpeckers ThinRip-Guide

New ThinRip Guide from Woodpeckers

Woodpeckers introduces the ThinRip Guide, a table saw accessory that delivers consistent thin strips without binding, burning or kickback, according to the company.


New fence setting gauges from Woodpeckers

Woodpeckers introduces the Simple Set Fence Gauges for aligning the rip fence, repeating setups, and checking table-to-blade alignment.