Woodworking Tools and Woodworking Machinery Article Archives
Friday, 26 June 2009 17:53
Laguna Tools has added a cabinet door machine, the Raised Panel Master, to its Industrial Series machinery line. The machine, which the company says can make a raised panel door within two minutes, features three cutters on the same spindle to separately produce the stiles, rails and raised panels.
Written by Jennifer Hicks Monday, 01 June 2009 18:51
Interlocking biscuit joints will eliminate unsightly visible hardware used in fixtures, cabinets and other displays
Written by Jennifer Hicks Monday, 01 June 2009 18:39
General International has updated its aftermarket sliding table, the Excalibur 60", model 50-SLT60P. The table is designed to fit on almost any right- or left-tilt table saw, and is ideal for cabinet and furniture shops that have the need to cut wider stock or larger panels.
“We had been making the occasional minor tweak or change to these tables over the last few years, and we finally decided there was enough that could be done to improve the product that it was worth the expense of going through a full-scale redesign of the larger model and rename it 50-SLT60P — adding the ‘P’ for professional series,” says General’s Norm Frampton.
General enhanced the cross bracing substantially, including a new brace that bolts the entire assembly to the back of the saw. It also added an extra leg to the back end of the front rail to provide even more support for the table through the tail end of the cut. A row of multi-position mounting holes were also added to allow users to attach the legs to their brackets at different heights to compensate for uneven floors, for example.
“This is important to users because a sliding table system that is perfectly leveled and has this robust a support system can really be counted on for smooth square and accurate cuts even with the biggest sheet goods, time after time and cut after cut,” says Frampton.
The main mounting bracket is now a two-part system, featuring a repositionable mounting plate that can be secured to the main mounting bracket as needed, allowing the user to obtain up to 72" cutting capacity.
Frampton says the new mounting bracket is better fit for left-tilt saws. With the previous bracket, the upper portion of the motor cover door and even some motors on many left-tilt saws obstructed the clearance below the table that was required to mount any aftermarket system.
General has also added positive stops at 15, 22-1/2, 30 and 45 degrees on the angle adjustment rail for miter cuts.
“This takes the guesswork out of setting the crosscut fence,” adds Frampton.
As an added convenience, General has also added storage hooks on the outside rails to allow the user to safely stow the crosscut fence.
The 50-SLT60P is available from Excalibur/General International retail distributors throughout North America for $1,379.00. The sliding table measures 31" x 30" and requires a working floor space of 105" (front to rear) and 40" (to the left or right of the saw). It weighs 140 lbs.
Contact: General International, 8360 du Champ-d’Eau, Montreal, Quebec, H1P 1Y3. Tel: 514-326-1161. www.general.ca
This article originally appeared in the June 2009 issue.
Written by Jennifer Hicks Monday, 01 June 2009 18:32
The Folding Measuring System (FMEA) from the Hain Co., a portable miter saw stand, can help in producing fast and accurate cuts for finished carpentry and crown molding, or any kind of case work, says the company. The system allows tradesmen to avoid redundant measuring and cutting hassles on job sites.
Monday, 01 June 2009 18:25
Techno Inc. has brought more weight to the table with its new Pro Series CNC router offerings. Designed primarily for panel processing and millwork shops, the Pro Series routers are available in custom sizes as well as the standard 4x8, 5x10 and 5x12 machines. The company is capable of building custom machines up to 7x20.
Page 59 of 74