Rockler has new T-Track Stops

rocklerRockler introduced its new T-Track Stops in February, an accessory for the company’s T-Track Table.

The stops hold a workpiece to performing tasks such as belt sanding, hand planing or scraping dried glue, according to the company. They slide along the T-Track and can be tightened at the exact point on the track that best suits each project task.

“We developed three different T-track Stops for our table or any system someone builds on their own. We built them with the idea the material you’re working with is at least 3/4” high and so they don’t interfere with your workpiece,” Rockler vice president of product development Steve Krohmer says.

“These low-profile stops have a locking mechanism to lock in place with folding tabs so you can tighten the T-bolt in the track and fold over the handle, and both sit below the workpiece. So you can, for example, run a belt sander right off the edge of the board and not catch the sander.”

The stops are designed to work with Rockler’s T-Track Table, but will work with any track that accepts 5/16” T-bolts.

The stops sell for $6.99 to $12.99, or as a kit for $24.99.

Call 800-279-4441 or visit www.rockler.com.

This article originally appeared in the April 2014 issue.

Add your comment

Your name:
Your email:

Comments are moderated and generally will be posted if they are on-topic and not abusive. For more information, please see our Comments Policy.:
  The word for verification. Lowercase letters only with no spaces.
Word verification: