New Woodworking Tools and New Woodworking Products

KerfGreen

Monday, 29 September 2008 20:53

KERFGREEN is an environmentally friendly version of KerfKore, a bendable substrate and panel product used primarily for radius work. The product has a NAF (no-added formaldehyde) core and qualifies for credits under the LEED green building rating system. It allows for horizontal- or vertical-grade laminates, metals, two-ply and phenolic-backed veneers to be laminated flat and then cold formed into virtually any shape without stress cracks, delaminating or telegraphing, according to the manufacturer. KerfGreen is available in 4x8 and 4x10 panels and thicknesses of 3/4" and 5/8". The 3/4" KerfGreen retails for about $4/sq. ft. Contact: Kerfkore Co., 2630 Sidney Lanier Dr., Brunswick, GA 31525. Tel: 912-264-6496. www.kerfkore.com
   

Tormek knife jig

Monday, 29 September 2008 20:51

TORMEK KNIFE JIG, model SVM-140, is an accessory for the company’s sharpening system. The wide jig provides support, solving the problem of sharpening long and flexible blades. The jig is made for blades longer than 6-1/4"; Tormek also offers model SVM-45 for shorter blades (minimum length: 2-3/8"). Both jigs are priced under $50. Contact: Tormek, 1110 W. State Hwy. CC, Brighton, MO 65617. Tel: 800-586-7635. www.tormek.com/en
   

Safety Speed Cut adds edgebander line

Monday, 29 September 2008 20:29

Safety Speed Cut is offering two edgebanders (hot air and glue pot) that were formerly sold by Anderson Mfg. of Canada. Except for new Safety Speed Cut labels, the two American-made machines are basically the same as the Anderson products. Safety Speed Cut may make some changes or additions to the machines down the line, but nothing specific is planned at this time.

Read more...

   

New products

Tuesday, 26 October 2004 16:54

Read more...

   

New products

Tuesday, 26 October 2004 16:56

Read more...

   

Page 82 of 96